: New Products - Trim

Tail Brace Wire Set

Wed, 16 Oct 2013 03:12:39 +0000

Tail Brace Wire Set-J10555-J10556

For Experimental J3, PA11, PA12, and PA18. Tail brace wire set complete with all fittings and upper fin formed washers. NOT FAA/PMA APPROVED.

&..

Price: $450.00

Trim Indicator Kit

Wed, 16 Oct 2013 03:12:38 +0000

Trim Indicator Kit-IK2011

This kit has all the parts you need to install an overhead trim indicator system. Can also be used for side mounted trim with slight indicator modifications. Comes with everything you see here. NOT FAA/PMA APPROVED.

Price: $85.45

Rear Horizontal Stabilizer Pivot Shaft

Wed, 16 Oct 2013 03:12:38 +0000

Rear Horizontal Stabilizer Pivot Shaft-J86062-79

This tube mounts the rear horizontal stabilizer to the airframe and is clear zinc plated. NOT FAA/PMA APPROVED.

Price: $14.25

Trim Handle and Bearing Assembly

Tue, 15 Oct 2013 23:23:19 +0000

Trim Handle and Bearing Assembly-41111EX

Our trim handle assembly features double sealed ball bearings installed in a weld on bushing with a cable retainer. It is designed to be located on the front cockpit overhead X brace tube. The stainless steel shaft is keyed to the handle and pu..

Price: $125.00

Rear Trim Indicator Cable Pulley Mounting Bracket

Tue, 15 Oct 2013 03:30:28 +0000

Rear Trim Indicator Cable Pulley Mounting Bracket-J40821-3

This bracket is used to mount the rear trim indicator cable pulley to the bottom of the upper center back stringer and has a 3/16" hole for the J1-750 pulley bolt, can be drilled out to 1/4" if an original pulley is used. NOT ..

Price: $6.00

Front Horizontal Stabilizer Link Tube Assembly

Tue, 15 Oct 2013 03:30:28 +0000

Front Horizontal Stabilizer Link Tube Assembly-J14180-2

This horizontal link tube assembly has oilite bushings in both ends and a fitting for a grease zerk in the center. Fits Experimental J3 aircraft and up. NOT FAA/PMA APPROVED.

Lightened Front Double Groove Trim Pulley-J12983L

This pulley is the same as the J12983 pulley but has been lightened. NOT FAA/PMA APPROVED.

Price: $68.80

Lightened Rear Double Groove Trim Pulley

Tue, 15 Oct 2013 03:30:28 +0000

Lightened Rear Double Groove Trim Pulley-J12982L

This pulley is the same as the J12982 pulley but has been lightened. NOT FAA/PMA APPROVED.

Price: $94.30

Elevator Trim Tension Spring

Tue, 15 Oct 2013 03:30:28 +0000

Elevator Trim Tension Spring-J81411

This spring is used on the elevator trim system with double groove pulleys and has closed loop ends and identical length and tension specs as the original J81411 spring. Fits Experimental J-3 thru PA-18 aircraft. NOT FAA/PMA APPROVED.

Price: $8.00

Elevator Balance Cable Pulley Housing

Tue, 15 Oct 2013 01:55:05 +0000

Elevator Balance Cable Pulley Housing-J81381

This bracket is used to locate the upper elevator balance cable pulley. NOT FAA/PMA APPROVED.

Price: $32.50